Welcome, Guest. Please login or register.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - FearNoEvil

Pages: [1]
1
Id love to keep the barrel but the new style gun i want is a much larger inner barrel therefore i wont be able tp just swap

2
Hey everyone. Im looking to sell my current gun only in order to provide funds towards a new one. I have a CM16 Intermediate Predator, full metal. Ive literally only used it twice at 2 games, total of 7 hours or so. Only thing ive done is put a M120 spring in to run higher BBs. Still have original spring. More than capable of handling it because it has a 25000 high torque neo mag motor. Only thing wrong with the gun is the panel connected to the charging handle came off and idk how to put back on, also i stripped a screw on the motor plate. EASY fixes. Im lookong for $200 or best offer. I paid $330 total and only owned for about 3 months. I will include original mag, additional mag, and a 9.6v battery.

ALSO I have a profesionally RHOP prometheus 6.03 inner barrel, 260mm with a modifief lonex hop up. DROP IN READY. I will sell with or seperate. This barrel was made for the predator but ive yet to even install it, and is compatiable with any M4 style AEG. This alone cost me $130 for barrel, barrel and hop up rhop mods. Always wanted to Rhop but dont know how to diy? Well here is your chance. Ill take no less thab $100 aa the promy barrel itself is worth $60 and it is still brand new in packaging never been used

3
Airsoft Discussion / Best Stock Rifle
« on: July 14, 2017, 10:25:11 PM »
I want something out of the box at top performance. Under $500 range. What are the top of the line manefactures and what.are their best models? Ive done alot of research and see alot of names but not one solid. Most common I see are G&P, VFC, G&G. Preferably id like something 380-420fps out of box soI can push .28-.30 BBs. Also not necesarry but a 260mm inner barrel wpuld be wonderful sense I have a Rhop drop in kit

4
Tech Questions / Re: R-Hop FPS?
« on: June 19, 2017, 02:19:51 PM »
Thank you all for the intel. Im completely new to the upgrade seen, so the information is greatly appreciated. With all of whats said, on short note I supposr what im getting at...Is will my Rhop be just as effective running 320 fps with .20s Vs running say 350 fps with .30s? I want to be sure if I should leave it as is and run with .20s. Or upgrade spring and run .30s?

5
Airsoft Discussion / M120 Spring?
« on: June 17, 2017, 09:08:17 PM »
So I own a Cm16 Predator by G&G, all stock. Now it is the intermediate model, which has a "IFRIT 25000 High Torque" motor. Im currently only shooting at 320 fps. Id like to up this so I can use heavier BBs. Im goig to get inside and do my compressions, I have a new air nozzle with o ring to install. I also use a 9.6v 1600wah battery. Should I be okay to upgrade with a M120 spring?

6
Tech Questions / R-Hop FPS?
« on: June 17, 2017, 03:58:19 PM »
So, I went ahead and took the easy route. Had a R-hop install kit ordered. That beig said, my gun is only at 320 fps with .20 BBs. Would this Rhop allow me to shoot heavier BBs at the same FPS? Or would I have to still upgrade my spring to properly use the rhop with heavier BBs? Im looking to use .28s and .30s. I read that the rhop is able to do so without increasing FPS, but I need to be sure. I have a big game coming up.

Thank you.

7
Sounds awesome, I cant wait. Hopefully it doesnt rain -_-

Thank you for the intel

8
Event Planning / TC Paintball - Copemish, MI. OPERATION THROW DOWN
« on: June 14, 2017, 03:39:28 PM »
Anyone attending this event? Im not to sure on details and looking to find out more about it. Its a 2 day (camping is free) airsoft operstion at TC Paintball in Copemish. $50 entry I believe, June 24th&25th. Camping overnight is free. I believe its DEA Vs. Cartel. Other then that I have no idea of what gameplay is scheduled?

9
Tech Questions / Need Help Shimming
« on: June 14, 2017, 03:33:17 PM »
Hellp everyome, Ive been watching alot of DIY videod and have learned a handful about the "shimming" process. I have a set of shims coming, I was wondering if there is any technicians or experianced people who could help me do so? I want it to be done properly and quite frankly, perfectly. I live in Petoskey, MI. If anyone nearby would be willing to do so, I am offering an easy $50 for the job.

Thank you :)

10
Newbie Discussion / Re: GoPro/Camera loadouts
« on: May 30, 2017, 10:52:15 AM »
I use an Apeman I baught off amazon. Its 1080, and starts at only $40. Waterproof case and all mounts included. Its awesome. Only con is the sound doesnt pick up very well

11
Newbie Discussion / Re: Upgrading My FPS
« on: May 30, 2017, 10:49:43 AM »
Yea I know .BBs have a lot to do with it. You don't mean hop up as in simply adjusting it do you?

I dont know much about the whole compression, I get the concept, but I dont know where I would start to test it. I really just want a simple upgrade. I dont want to play with the guts too much
 Frankly im nervous just to take it apart and put a new spring in lol
 As far as a spring guide, any metal one with bearings wpuld be good? For all I know I may have one, I heard G&G have pretty good internals.

12
Newbie Discussion / Upgrading My FPS
« on: May 28, 2017, 01:46:15 PM »
Hello everyone, as being a newbie speaks for itself (newbie discussion page) I have a decent amount of knowledge to a variety of things, but I am clueless to internal components. I have a brand new CM16 Predator (Intermediate) which I've played with once, and it operates phenomanal. I only have one concern
 My FPS is at a low of 320, which isnt horrible for the field I plan on. But from experiance, I noticed a handful of times I could have got some kill shots if I had a bit more range.

Id like to upgrade to atleast 380-420. Im at 320 with .20 BBs. I have a ver 2 gear box, and a 25k motor. I believe my stock spring is 100. Is upgrading my FPS as simple as getting a new spring? I watched a DIY video and a Systema (?) 120 spring can get me to where I want to be 380 with .25 BBs. Is it really as simple as swapping my spring and spring guide? Please any advice and tips on upgrades would be much appreciated.

Going to a 2 day operation at TC paintball in traverse. Id like to be at the top of my game. Thank you
-Edward

13
Recruitment / Re: looking for players in the northern michigan area
« on: April 20, 2017, 10:17:09 PM »
Hey im most definitely interested! Right in my region. I live in Petoskey, I just moved up from downstate and Ive been searching for a community or group to get involved with. Please contact me with any details, im easy to work with and a great teamplayer. A bit of a noob but im well geared and I also have my own vehicle. Thank you.

-Edward

14
Recruitment / Looking To Join A Community - Northern MI
« on: April 20, 2017, 10:12:59 PM »
Hello everyone, my names Edward and I'm looking into finding a community of airsofters which rally on a decent basis. I just moved to northern Michigan from downstate. Im living in the city of Petoskey, pretty much starting from scratch.

That being said, I know of no groups or people around here that are into airsoft. There is two courses around here, and only two. Both of which accept groups of airsoft but only do open play for paintballers. I've got all the gear, I've got the time, and I have a vehicle. Im willing to drive up to two hours for games or events. There is a Traverse City paintball which has started airsoft on saturdays, but I work 8am-8pm on saturdays.

Long story short, this isnt a dating site, and im not lookig for a partner. I am however open to private and public eventz, I am an entry level with proper gear, easy to work with, dont mind following orders, nor giving them. Honorable player, and good at heart.

Thank you

Pages: [1]