I’m looking for a new project so I’m thinking about selling this badass SAW. There is absolutely nothing wrong with it. The base gun is an A&K.
I’m a tech and I have worked on 249’s for many years. I know every little issue an A&K can have and I have fixed every single one. There are no feeding issues and it has a very functioning Hop Up.
Now what you’re wanting to really know, the parts list:
Electrical
- Gate NanoSSR MOSFET (w/signal wires)
- 16awg Gate Wiring
- Gate gold-plated motor terminals
- Dean’s Connector
- Upgraded 20A Trigger Switch
- Echo 1 HT motor
Power
- M125 spring
Compression
- AIM Hellfire Piston
- Lonex Aluminum Piston Head
- Polished Cylinder
- Retro Arms 7075 Aluminum Cylinder Head
- Retro Arms 7075 Aluminum Nozzle (w/o-ring)
- Falcon Bucking
Barrel
- PDI 6.03mm TBB
(It will come as shown in the para format)
Gears
- A&K Bevel
- G&G’s ‘Top Tech’ Spur and Sector
This gun shoots very far and is very accurate. Gun will NOT come with accessories shown. It WILL, however, come with the lower rail section. It will come with a MAG box mag that works, but you need to hold down the press-sensor while shooting. I think it just needs to be cleaned out.
Looking for
$400 PICK UP, $450 SHIPPED 
