16
Michigan Commerce - Airsoft Guns Allowed / Re: WTS Frankenstein M4
« on: November 05, 2018, 12:39:53 PM »
Still available?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
Michigan Commerce - Airsoft Guns Allowed / WTS/WTT: The Ultimate M249 SAW AEG
« on: November 05, 2018, 12:29:57 PM »
I’m looking for a new project so I’m thinking about selling this badass SAW. There is absolutely nothing wrong with it. The base gun is an A&K.
I’m a tech and I have worked on 249’s for many years. I know every little issue an A&K can have and I have fixed every single one. There are no feeding issues and it has a very functioning Hop Up.
Now what you’re wanting to really know, the parts list:
Electrical
- Gate NanoSSR MOSFET (w/signal wires)
- 16awg Gate Wiring
- Gate gold-plated motor terminals
- Dean’s Connector
- Upgraded 20A Trigger Switch
- Echo 1 HT motor
Power
- M125 spring
Compression
- AIM Hellfire Piston
- Lonex Aluminum Piston Head
- Polished Cylinder
- Retro Arms 7075 Aluminum Cylinder Head
- Retro Arms 7075 Aluminum Nozzle (w/o-ring)
- Falcon Bucking
Barrel
- PDI 6.03mm TBB
(It will come as shown in the para format)
Gears
- A&K Bevel
- G&G’s ‘Top Tech’ Spur and Sector
This gun shoots very far and is very accurate. Gun will NOT come with accessories shown. It WILL, however, come with the lower rail section. It will come with a MAG box mag that works, but you need to hold down the press-sensor while shooting. I think it just needs to be cleaned out.
Looking for $400 PICK UP, $450 SHIPPED
I’m a tech and I have worked on 249’s for many years. I know every little issue an A&K can have and I have fixed every single one. There are no feeding issues and it has a very functioning Hop Up.
Now what you’re wanting to really know, the parts list:
Electrical
- Gate NanoSSR MOSFET (w/signal wires)
- 16awg Gate Wiring
- Gate gold-plated motor terminals
- Dean’s Connector
- Upgraded 20A Trigger Switch
- Echo 1 HT motor
Power
- M125 spring
Compression
- AIM Hellfire Piston
- Lonex Aluminum Piston Head
- Polished Cylinder
- Retro Arms 7075 Aluminum Cylinder Head
- Retro Arms 7075 Aluminum Nozzle (w/o-ring)
- Falcon Bucking
Barrel
- PDI 6.03mm TBB
(It will come as shown in the para format)
Gears
- A&K Bevel
- G&G’s ‘Top Tech’ Spur and Sector
This gun shoots very far and is very accurate. Gun will NOT come with accessories shown. It WILL, however, come with the lower rail section. It will come with a MAG box mag that works, but you need to hold down the press-sensor while shooting. I think it just needs to be cleaned out.
Looking for $400 PICK UP, $450 SHIPPED
18
Michigan Commerce - Airsoft Guns Allowed / Re: WTS: Extremely Upgraded A&K M249 w/Extras
« on: September 03, 2018, 01:08:25 PM »
Sorry, but it has been sold.
19
Michigan Commerce - Airsoft Guns Allowed / Re: WTB Coyote brown plate carrier!
« on: August 15, 2018, 08:14:42 PM »
I have something for you. If you’re still looking, shoot me a PM.
20
Michigan Commerce - Airsoft Guns Allowed / Re: WTB: Retro Arms M249 Parts!
« on: August 02, 2018, 02:00:30 PM »I have a bullgear m249 hop up chamber, brand new, unused. Given you were able to get some bushings to work with the gears in the stock shell.
I may take you up on that if I can’t find anyone with these two items. It’s unlikely that I will. I currently do not have any 8mm bushings. The only ones I have are glued into the Retro Arms V2 shell that I bought off you. I feel like switching to some SHS 8mm bushings could help my situation. If not, I’ll just go back to my stock set of gears for now.
21
Michigan Commerce - Airsoft Guns Allowed / WTB: Retro Arms M249 Parts!
« on: August 02, 2018, 11:17:05 AM »
Just as the title suggests, I’m looking for some M249 parts made by Retro Arms!
I’m mainly looking for the following:
- CNC Gearbox Shell w/butt plug
- CNC Proprietary Hop Up Chamber
They look like the following, respectively:
Yes, I already know that the stock shell is a beast; however, I cannot use their awesome hop up chamber unless I have their shell. Also, my stock shell doesn’t like SHS gears—the gears fit too tightly in the shell and I can’t sand the bearings down anymore.
I’m mainly looking for the following:
- CNC Gearbox Shell w/butt plug
- CNC Proprietary Hop Up Chamber
They look like the following, respectively:
Yes, I already know that the stock shell is a beast; however, I cannot use their awesome hop up chamber unless I have their shell. Also, my stock shell doesn’t like SHS gears—the gears fit too tightly in the shell and I can’t sand the bearings down anymore.
22
Michigan Commerce - Airsoft Guns Allowed / Re: WTS/WTT: Heavily Upgraded WE-Tech M16 GBBR w/7 mags
« on: July 26, 2018, 11:24:38 AM »
Bump
23
Michigan Commerce - Airsoft Guns Allowed / Re: WTS Frankenstein M4
« on: July 22, 2018, 06:32:07 PM »
PM sent
24
Airsoft Discussion / Re: How many mags do you carry?
« on: July 21, 2018, 08:27:48 PM »Normally, I run the standard combat load of 7 primary mags and 3 secondary mags. I’m used to that amount too. I also have a GBBR so I know what it’s like trying to stay low key and be mindful of firing, haha.
At least I'm not alone! What gbbr do you run?
I run a heavily upgraded WE Tech M16A3.
25
Airsoft Events / Re: Operation: Firestorm VIII ~ 10/13/2018 @ HITW (Bangor, Michigan)
« on: July 08, 2018, 08:28:36 PM »
Phantom G3 +3 for North Korea faction.
26
Michigan Commerce - Airsoft Guns Allowed / Re: WTS/WTT: Heavily Upgraded WE-Tech M16 GBBR w/7 mags
« on: July 05, 2018, 11:55:43 AM »
This is still available. Current price has been reduced $100. It’s now at $600 for a limited time!
27
Airsoft Discussion / Re: Best brand of bio bbs
« on: July 01, 2018, 09:30:21 PM »
I agree with T6e9a! G&G has never steered me wrong either. I’m currently running their .28’s when I need to use them for a field.
28
Michigan Commerce - Airsoft Guns Allowed / Re: TTW: Heavily Upgraded WE-Tech M16 GBBR w/7 mags
« on: July 01, 2018, 03:55:41 PM »
Bump!
29
Airsoft Discussion / Re: How many mags do you carry?
« on: June 30, 2018, 07:40:37 PM »
Normally, I run the standard combat load of 7 primary mags and 3 secondary mags. I’m used to that amount too. I also have a GBBR so I know what it’s like trying to stay low key and be mindful of firing, haha.
30
GAS / Re: Western Arms GBBR Questions.
« on: June 29, 2018, 07:53:03 AM »
This is old, but for future readers I will say this:
I have not owned a WA system, only WE systems. However, I’ve heard a lot of positive stuff on G&P’s WA system for skirmishing. A lot of people who run WA’s that I know swear by them along with KWA LM4s.
I have not owned a WA system, only WE systems. However, I’ve heard a lot of positive stuff on G&P’s WA system for skirmishing. A lot of people who run WA’s that I know swear by them along with KWA LM4s.