Welcome, Guest. Please login or register.
Did you miss your activation email?

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - J.Cubed135

Pages: [1]
1
Airsoft Events / SCN: OP Pushback 4
« on: March 20, 2023, 09:13:27 PM »
OP Pushback 4

Date: April 23rd, 2023

Time schedule:
BE ON TIME AND PLAN AHEAD. If you arrive after step off time you will be left behind and unable to join the game.
9:00 am – Gates open
10:00 am – Registration begins
11:15 am – Orientation / briefing
11:30 am – Step off
11:45 am – Game start

$20 
*Note: this will be a “private game” for only those who have seen this post or invited otherwise. Anyone is welcome to join as long as you understand the rules and concept of the game and agree to adhere to them.
In order to maintain quality of the game and keep everyone on the same page about the style of game being hosted, I’ll be scheduling this as a private game, so there is an additional fee I will be covering for everyone. Any contribution to help with this will be appreciated and any amount I collect over the fee will go back into future games via props and in-game items (tourniquets, bomb props, etc.). 

Rule set:
All replicas are restricted to semi auto only (no full auto, no burst, no binary, etc.) except for support style replicas used by a real military unit for such purpose (m249, pkm, m60, m240, pkp, etc.). Carbine or rifle based automatic replicas (M27, RPK, Shrike LMG) are allowed if they are configured to their real counterpart and are visually identifiable as such (bipod + optics). If you are unsure if your replica is under this category, PM me and we can discuss. 
Joule limits:
1.5J – *0ft MED
2.0J – 50ft MED, All automatic support replicas have 50ft MED regardless of being above 1.5J or not
2.5J – 100ft MED, DMR Only
3.0J – 150ft MED, Bolt Action Only

Medic, Revive, and Spawning system:
Any player can revive any player with a supplied arm band or the use of a fake tourniquet such as MSW branded tourniquets, up to a maximum of 2 times per life. Reset points will vary and change location based on the area the game is currently taking place in and the objective at the time. These changes will be relayed and explained throughout the game as it evolves and changes. Deaths by pyro or other simulation grenade are an immediate “out” for the players in the vicinity and must return to a reset point and are NOT eligible to be tourniquet revived.

Gameplay:
Objectives will vary throughout the day to include the traditional Pushback mode, capturing key points, planting prop bombs, hostage rescue, and VIP escort. Updates on objectives will be explained as the game evolves. The game will have small down times where you will regroup with your team to plan for the next objective and reload, but the game does not stop and we will not return to the staging area. Bring extra batteries, back up replicas, ammo, water, and food to last yourself throughout the day.
Bringing a programmable radio will be a huge benefit to you and your team to be able to communicate. The main theme of this game is teamwork and collaboration.

If you have any additional questions, PM me or find this post on the Michigan Airsoft Facebook Group.

2
No trades. Message me with questions and for additional pictures. Best to message me on Facebook (John Jack Needham) as I rarely, if ever, check here. In person discounts with cash (since I don't have to ship), I host some of the Hell Survivors rec games so thats the best time and place to meet.

https://imgur.com/a/HXtuHKm

LBX Lock n Load Chest rig Ranger Green
$90 shipped OBO
Excellent condition, only worn a handful of times

VFC m27
$500 shipped OBO
Some weathering / wear on the receivers with some scuffs, overall decent condition.
Prometheus 6.03 x 407mm tight bore
Maple Leaf bucking
Maple Leaf ESD Cylinder + cylinder head
CA FMR piston
Upgraded tappet (unknown brand, can check)
SHS/Rocket 13:1 gears
19 TPA neo magnet motor
Stock nozzle (o ring)
VFC mosfet
G&G KAC style grip
KAC style 300m sights (not stock 600m style one)
Shoots ~1.45J with .32g

G&G Scar L HPA
Wolverine Gen 1 Inferno w/premium electronics.
Gen 1 Inferno
Grip connect
QD suppressor (hides extended inner barrel)
Decent amount of wear, but solid construction. Some rust spots. Missing right side selector but left side is fully functional. Missing buttpad pin but battery area can still be accessed by extending the stock out.
Selling for a friend, looking for $450 shipped OBO

VFC Scar L
$350 shipped OBO
G&G gears
JG/GE neo motor
SHS piston
Lonex tappet plate
Maple Leaf cylinder set
Gate mosfet (tucked into lower receiver)
AirsoftPro hop up unit
G&G green bucking
PWS rail extension by Madbull
Has slot cut away in the stock to run a battery pack given the tiny space inside the stock.

CYMA Platinum 10.5"
$250 shipped OBO
Excellent condition, only used a few times. Original box
O ring nozzle
Madbull Blue bucking
Different spring
Full stroke sector gear (stock are -4)
Can include some 9.6v 1600 mAh NiMH as well.

3
Michigan Commerce - Airsoft Guns Allowed / WTS: CYMA SR25
« on: January 28, 2021, 07:48:31 PM »
No trades. Contact me on Facebook under John Jack Needham as I almost never check my messages here.

$650 local cash / Venmo / PayPal friends and family in person. Meet at Hell Survivors rec games usually best.

$740 shipped, insured, etc. Elsewhere. Via PayPal Goods and Services.

No trades. More pictures / video available.









Gun shoots excellently at 1.9J. Minimal use on the gun, about 5k rounds through it. Gear is a bit more used, but good condition all around, back pack is like new, only mounted on, never fielded. PEQ is boneyard, just there for looks (so retail total is $1200 giving the PEQ $0 value). Has repro ACS stock, as well as original (going for an 'airsoft' / partially resemblance to m110k1 build), ACS stock side tubes modded to fit a cell from an 2000mAh 11.1v / 7.4v battery.

Parts / Retail value list:

14.5" SR25 Platinum - $260
UXR CYMA rail - $55
8 A&K mid caps - $96
9 7.62 Magpuls - $45
New followers x8 - $16
G&P URX kit - $48
Valken short dot - $85
AOLS SR25 cylinder - $20
Guarder SP130 - $15
ZCI 6.02 barrel - $25
G&G green + R-hop - $30
SHS g36 o ring nozzle - $5
Retro Arms trigger - $10
Deans - $5
VFC PEQ - $100
AFG clone - $13
Repro ACS stock - $40
Bipod - $30
LBX Lock n Load - $110
Ferro 7.62 insert x2 - $47
Idogear 410 pack - $50
Magpul MS1/MS3 sling - $45
Just shy of 10k .36g bbs - $90
Odin + adapter - $60
Total: ~$1300 Retail

4
Airsoft Events / REC: Hell Survivors 2021 Airsoft Schedule
« on: January 21, 2021, 08:06:11 PM »
Hell Survivors 2021 Airsoft Info
Cost: $20 (air fills included, up to 4500 psi)
Address: 619 Pearl St, Pinckney, MI 48169

Waiver: https://www.vantora.com/paintball/hellsurvivors/waiver

*Waivers are filled out once a year, starting January 1st of each year.*

Schedule:
1st and 3rd Sundays of each month (for spring/summer/fall season) unless there is conflict with a prior scheduled paintball event, then 1st Sunday of the month for winter season.

Normal Hours: Gates open 9am, Registration/Chrono at 10am-10:30am, Games on 11am-5pm (Varying Lunch Breaks, if any)

Winter Hours: Gates open 10am, Registration/Chrono 10am-10:30am, Games on 11am-4pm (No Lunch Break)

Winter Dates:

January 3rd: “New Year’s Game” / Rec
February 7th: Rec
February 14th: Valentines Game / Rec
March 7th: Rec
March 14th: St. Patrick’s Day Game / Rec

Standard Season Dates:

April 4th: Closed for Easter Sunday
April 18th: Rec
May 2nd: Rec
May 16th: Rec
June 6th: NO AIRSOFT / Paintball Global Conquest
June 20th: Rec
July 4th: Rec
July 18th: Rec
August 1st: Rec
August 15th: Rec
September 5th: Rec
September 19th: Rec
October 3rd: Rec
October 17th: Rec

Winter Dates:

November 7th: Rec
November 21st: Rec
December 26th: Rec, Saturday Game, Not Sunday

Chrono Rules:

AEG / Pistol chrono’d with .25g bb
HPA / Gas / Bolt / Etc. chrono’d with .32g bb
1.5J – 10ft MED
1.9J – 60ft MED
2.4J – 120ft MED
3.0J – 175ft MED
Games are traditionally semi only except for true support weapons / true LMGs. Full chrono breakdown linked.

5
Airsoft Events / REC: Hell Survivors 2020 Airsoft Schedule
« on: January 05, 2020, 05:42:16 PM »
Cost: $20 (air fills included, up to 4500 psi)
Address: 619 Pearl St, Pinckney, MI 48169

Waiver: https://www.vantora.com/paintball/hellsurvivors/waiver/mobile.asp

Waivers are filled out once a year, starting January 1st of each year.

February 2nd, March 1st: 10AM - 4PM

April 5 and 19, May 3 and 17, June 21, July 5 and 19, August 2 and 16, September 6 and 20, October 4 and 18: 9AM - 5PM

November 1, December 6: 10AM - 4PM

Chrono limits:
AEGs chrono'd with .25g
HPA, Gas, CO2, Bolt action, etc. (Any system capable of excess volumes) chrono'd with .32g
1.55J - 5ft MED
1.86J - 60ft MED *LMG/Support up to here
2.10J - 80ft MED *Semi locked
2.40J - 125ft MED *Semi locked and true DMR
3.00J - 175ft MED *Bolt Action only

Games are traditionally semi only except for true Support/LMGs

6
Michigan Commerce - Airsoft Guns Allowed / WTS: Upgraded VFC m4s
« on: November 29, 2019, 11:36:56 AM »
No trades. I have 3 upgraded VFC m4s for sale, many of the parts are new inside and out, and I offer a "lifetime" warranty any of the work I have done, so if anything goes wrong under normal use, I'll replaced/fix it accordingly, this does not cover external damage as I have no control over your use of the gun; be sensible. Find me on Facebook under John Jack Needham (or text me at 810-964-1825), as I don't check my messages here often. More pictures and information available upon request.

VFC Platinum m4 - $400
All new internals and externals, except the rail.
Short dot 1-4x
LCT stock
Internals:
Lonex compression set (nozzle, cylinder head, cylinder, piston head)
CA FMR piston
1.5 J spring (400 FPS with .20g)
New tappet plate (can't recall brand)
SHS 12:1 gears
Hulkfet mosfet
Custom 19 TPA neo motor
Maple Leaf bucking


VFC block 1.5 - $550
All new parts inside and out. I built this and it has sat since as a wall hanger. Only shot to test during build process, shoots phenomenally. PEQ and Eotech replica can be removed and I'll drop off $50
Eotech replica
Empty PEQ (battery box, just for looks)
KAC style foregrip
KAC style flip up rear sight

Internals:
Lonex compression set (nozzle, cylinder head, cylinder, piston head)
CA FMR piston
1.5 J spring (400 FPS with .20g)
Lonex tappet plate
SHS 12:1 gears
Hulkfet mosfet
Custom 19 TPA neo motor
Lambda 6.01 363mm barrel
R-hop
Prowin hop up
Madbull blue bucking


VFC DMR m4 - $400
CA o ring nozzle (new)
SHS cylinder head (new)
CA FMR piston (new)
G&G tappet plate
SHS 12:1 gears (new)
19 TPA custom motor
Hulkfet mosfet (new)
Maple Leaf 80° bucking (new)

14.5" outer barrel with extension (new)
CA extended S-system (new)
Valken grip (new)
Short dot 1-4x
Flip up sights

Shoots 1.7J (~427 FPS with .20g)










7
Michigan Commerce - Airsoft Guns Allowed / WTS: Upgraded VFC guns
« on: February 03, 2019, 09:45:34 PM »
Text me at 810-964-1825, text only please. Or find me on Facebook as John Jack Needham. I am not here frequently so I don't really check my messages here.

All 3 guns are essentially new, they were built inside and out then hung up on a wall. The 4CRS has had a few modifications as it was once an HPA gun with Wraith stock, but still in excellent condition. The VFC platinum and 4CRL are essentially brand new condition inside and out.

VFC / Elite Force 4CRS $300

Externals:
G&P numbered buffer tube
New outer barrel

Internals:
Maple Leaf cylinder, cylinder head, and piston head
19 TPA neo motor (VFC arm in neo can)
King Arms tappet plate
CA FMR piston
SHS 12:1 gears
Spark labs micro mosfet
Lonex hop up unit
Lonex 70° bucking

Shoots 360-365 FPS with .20g

Can include 7.4v Lipos that fit in the buffer tube and a basic lipo charger for extra if wanted. Also can wire to deans if preferred for free.



VFC / Elite Force 4CRL DMR $400

Externals:
Valken 1-4x short dot
Classic Army extended S-system rail (discontinued and rare)
20 inch barrel (inner matches)

Internals:
19 TPA neo motor
G&G tappet plate
CA FMR piston
Full cylinder
Maple Leaf double o ring cylinder head and piston head
SHS 12:1 gears
Spark Labs micro mosfet (deans)
Maple Leaf bucking
ZCI steel 6.02 x 509mm barrel

Shoots 440 fps with .20g bbs



VFC Platinum Grey Block 1.5 + LVOA upper Price varies on how much you want.

Just base gun: $400
Block 1.5 attachments: $550
Block 1.5 + LVOA: $650

Externals:
VFC platinum base
CYMA KAC style rail (stock hand guard also included)
Element Block 1 attachments package (PEQ, dual pad, M3X)
Eotech XPS QD mount
VFC KAC style flip up rear sight
G&G foregrip

2nd upper: Grey VFC platinum upper with a black LVOA rail (and outer barrel) and Tippmann MBUS style flip ups . This upper has a more used condition, but still in good shape

Internals:
Maple Leaf 80° bucking
Lonex compression set (nozzle, cylinder head, cylinder, piston head)
CA FMR piston
1.6 J spring (415 FPS with .20g)
New tappet plate (can't recall brand)
SHS 12:1 gears
Hulkfet mosfet
19 TPA motor (VFC arm in a neo can)

Contact me as listed above for more information and pictures

8
Michigan Commerce - Airsoft Guns Allowed / WTS: HPA G&P m249
« on: October 04, 2018, 09:52:17 PM »







sl550 0 60
Looking to sell my G&P m249. It's HPA'd with a Protech mk2.5 unit.
Custom sling, ZCI 509mm 6.02 steel barrel, wire stock, railed hand guard. I have a Wolverine Storm regulator and a dual rig adapter as well for it. I can add air tanks for extra.

Looking to get $600 for just the gun, $680 for gun + regulator, then +$90 per carbon fiber 68/4500 tank.

Message me on Facebook (John Jack Needham) or text me at 810-964-1825 (Text only, please leave your name and specify you saw this post).

I can provide more pictures and details

9
These guns are in excellent condition, all work 100% as they should. The 2 scars and 416 are in very good condition and look almost new. The 2 handguns are new, only opened for pictures. The pictures are too large to upload here, so message me for pictures. All prices are OBO, I'm open to negotiation. The best way to reach me is on Facebook: John Jack Needham.

I also can provide tech services. I can work on AEGs and HPA platforms (m4, AKs, scars, 417, mp5, etc.), no gas guns. I do R-hops as well. I won't claim I can do everything, but I'm willing to help you out as much as I can. Again, best way to reach me is via my Facebook.

WTS:

2 G&G Scar Ls (1 black, 1 tan) - $300 a piece
-Hi torque motor
-Maple Leaf compression sets
-CA full metal rack piston + AoE correction
-SHS o ring air nozzle

CA M16 - $250
-O ring nozzle, CNC double o ring cylinder head
-Deans
-ZCI balance motor
-FMR piston + AoE

VFC 416 - $350
-2015 edition with mosfet
-FMR piston + AoE
-Prometheus barrel R-hopped
-SHS o ring nozzle
-Modify 22TPA hi torque motor

VFC CQB m4 - $300
-ACSU gen 4 mosfet
-FMR piston
-Daniel Defense Omega X 7 rail

VFC FNS9 -$80
-propane adapter

KWA USP - $100
-3 mags
-propane adapter

10
Michigan Commerce - Airsoft Guns Allowed / WTS: E&L AK, BW1911
« on: June 07, 2016, 07:37:24 PM »
I'm looking to sell some of my extra airsoft stuff so I can have some additional cash for the fall semester at college. I will take cash/PayPal in person and PayPal only if I have to ship
Contact for myself can be through here but your best bet is to TEXT me at 810-964-1825 (please refrain from calling).

E&L AK74N: $200 o.b.o.
-Like new condition (fielded twice)
-5 E&L mid caps
-3 CYMA hi caps
-Scope Mount

BlackWater 1911: $90 ($70/$25)
-Brand new for $70 (tested for leaks/functionality only)
-Brand new extra mag (will part for $25)













Pages: [1]