Gear > Accessories & Ammo

XCORTECH X3200 MK3 Review

(1/3) > >>

luke213:


So a few months ago I bought an XCORTECH X3200 MK3 chronograph. I’ve in the past used the 2nd generation and while it was pretty accurate I did have a few complaints. I’ll cover some of that below afterwards.

Setup:
None the less lets start with the simple stuff, this will run off a micro USB cord, or you run with AA batteries. I’ve never really used the power cord setup(not included at least for me), I have been running it happily on AA batteries. I’ve used it a fair amount and I’ve been running fairly cheap rechargeable AA cells which aren’t super quality. As a result they likely don’t have a high mah rating and are lasting less than a set of primary cells would(AKA Duracell or the like alkaline cells). That said I’ve only changed them once so far in several months so really I can’t complain it seems find on battery consumption.

Use:
The menu’s are slightly harder to figure out compared to the previous version it’s just slightly different. I can’t give exact specifics since it’s been a while since I used the previous version. But the menu is slightly different. And for instance for a month I didn’t think you could change the weight of the ammo in the chrono to a custom weight to get joule calculations. Only later did I realize I actually could click the power button on a weight and change it. Where from memory the old version you have a specific menu where you set the weights. So different, not bad but different if you’re used to the older version.

Function:
So function it’s excellent, I very seldom get a shot that doesn’t register. Usually it’s when it impacts the wall of the chrono. I mentioned at the start I had complaints about the previous version that was one of them. The old version was plenty accurate from what I saw and this one reads within 1fps with the same gun which is virtually identical since the gun I tested is +-1fps. With the old one I’ve had several guns where I had to fire say 5 rounds and only 2-3 would register. Or worse my bolt action I’d shoot maybe 10 rounds to get one to register. So the consistency of registering shots I’d say is greatly improved. From what I’ve read this one has more sensors than the MK2 causing its higher detection rate.

Source/Price:
I bought mine on BrillArmory for $75+shipping. Those not familiar with Brill shipping is quite cheap and I had other things on the order. So I don’t know exactly the shipping but it was a buck or two. I got it quick and had zero issues. Also I did consider the old version when I got this one, but it was only $5 or so cheaper and I decided to go with this model and in retrospect I’m quite glad I did. I will say this one feels slightly cheaper than the old version but it’s a toss up, close enough I can’t say it’s really a con.

Conclusion:
For the dollar amount it’s excellent. For the accuracy I’d say the same thing. If you’ve been considering a chrono I can’t recommend this one highly enough. I’ve spent allot of money over the years on parts and guns in airsoft. One of the things I always lacked was a way to check my work so to speak on guns. So I’d borrow a chrono or guess what a gun was shooting until I got to a game to check it. Now I can change something with a gun and test. Get a result and determine if it makes sense. I’ve had a ton of things this has identified as a problem since I started using it. Guns that I thought were shooting fair but hadn’t chrono’d. Only to find out that they were shooting very low FPS because of a compression leak I had to track down etc. So great chrono and a great addition to anyone’s gear who works on guns at all.

If anyone has any questions or things I forgot to mention feel free to post and I'd be happy to help.

Luke

VooDoo:
Excellent review! I've been on the fence between several different chronos for some time. I think you just helped me decide!

luke213:
Thanks sir glad to helped. I was thinking about this a while back because when I was looking I couldn't find many reviews on this new version. Few videos etc but not much to compare it and the older version.

Either way glad it helped and I'd say you'll be happy with this one. Really a nice chrono for the price. And I'll say I trust the output enough that I bring it with to local games if there is a weird reading on the old one so we can double check.

Take care

Luke

Sent from my XT1060 using Tapatalk

ctres:
I have the plder version and it has served me well. Does this one still have the issue with readings changing depending on lighting conditions?

luke213:
Hmm I haven't seen that issue with it, but to be completely honest I didn't notice it on the other one either. Give me more info and I'll see if I can't test it for ya and see since it's sitting right next to me;)

Luke

Navigation

[0] Message Index

[#] Next page