1
Michigan Commerce - Airsoft Guns Allowed / Re: WTS FNX .45, Echo1 m28, CA p90.
« on: November 21, 2017, 07:12:52 PM »
Does the P90 have the integrated red dot or rail?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Michigan Commerce - Airsoft Guns Allowed / Re: WTS: GBB Glock/ GBB Dragunov/ the rest of my stuff
« on: November 21, 2017, 07:08:50 PM »
Interested in the glock, where are you?
3
Michigan Commerce - Airsoft Guns Allowed / WTS JG AUG A4 and JG M4 (3D printed parts)
« on: July 10, 2017, 08:26:08 PM »
JG AUG A4 - No issues and is stock internally. Body is painted grey and the filler parts with flash are 3D printed. Includes 3 midcap mags and 1 hi-cap.
JG M4 - Used to be a Dragon Star. Only issue is the delta ring is on very tight and can't seem to get it off. Comes with 2 plastic midcaps and 2 metal midcaps. 3D printed parts are the flash hider and bolt handle. Flat hopped.
Both are $110 shipped or $100 f2f. I am in Northville.
Images: http://imgur.com/a/GHfY8
JG M4 - Used to be a Dragon Star. Only issue is the delta ring is on very tight and can't seem to get it off. Comes with 2 plastic midcaps and 2 metal midcaps. 3D printed parts are the flash hider and bolt handle. Flat hopped.
Both are $110 shipped or $100 f2f. I am in Northville.
Images: http://imgur.com/a/GHfY8
4
Michigan Commerce - Airsoft Guns Allowed / Re: WTB:Broken guns and those in need of tech work
« on: November 25, 2016, 09:43:30 AM »
I have some sort of Stubby M4. Right now it's in a Combat Machine body because I got an outer barrel stuck inside of the original full metal one. Don't know what's wrong with it at the moment. Originally it was the motor not being at the right position, now it won't even spin with batteries connected. Could probably use new wires is the only issue. Comes with gun, body, and stuff in the picture. Name your price on this.
http://imgur.com/tQP3hVj
From here:
http://www.airsoftmegastore.com/10030-ank-m4-cqb-stubby-airsoft-aeg-rifle-w-mock-suppressor-ank-cqb03.aspx
http://imgur.com/tQP3hVj
From here:
http://www.airsoftmegastore.com/10030-ank-m4-cqb-stubby-airsoft-aeg-rifle-w-mock-suppressor-ank-cqb03.aspx
5
Michigan Commerce - Airsoft Guns Allowed / Re: WTS: Everything (CB Gear, Sr16, KJ G27, Batteries, Misc Parts) BACK AT IT!
« on: November 21, 2016, 10:08:13 PM »
Would you be open to trades for the glock and vest? I have a PPQ with laser, suppressor, 1 working mag, and 1 with a broken lip. I live in Northville if it's more convenient. The suppressor is a madbull 9mm one worth $40 but it's pretty roughed up to match the PPQ. If not I'll most likely buy just the glock from you in person.
Phone: 248-657-0132
Images: http://imgur.com/a/64X5W
Phone: 248-657-0132
Images: http://imgur.com/a/64X5W
6
Michigan Commerce - Airsoft Guns Allowed / Re: WTB: Stubby Killer
« on: November 15, 2016, 11:56:34 AM »
I have a front assembly for one. Outer barrel, rail, silencer, and the jazz. http://imgur.com/a/uXh5b
7
Michigan Commerce - Airsoft Guns Allowed / Re: Selling off all of my extra stuff! I want to get down to a couple guns or so.
« on: October 05, 2016, 01:27:28 PM »
Got any M4 rails or handguards that'll fit a 8.4v brick battery?
8
Michigan Commerce - Airsoft Guns Allowed / Sold Please Remove
« on: July 12, 2016, 08:47:41 PM »
http://imgur.com/a/jjVmx
Comes with:
2x 47 style metal high cap flash mags
1x 74 style polymer high cap
Rail of sort, doesn't go well with this gun but hot glue can get it sturdy.
The paint job is smooth but it can be removed easily if you don't want it.
Selling price is $90. Would like to trade for a CO2 pistol of some sort that isn't a hi-capa/1911.
I'm in the Detroit area, I'd prefer to meet up than ship but if I do ship we'll split the cost 50/50.
Comes with:
2x 47 style metal high cap flash mags
1x 74 style polymer high cap
Rail of sort, doesn't go well with this gun but hot glue can get it sturdy.
The paint job is smooth but it can be removed easily if you don't want it.
Selling price is $90. Would like to trade for a CO2 pistol of some sort that isn't a hi-capa/1911.
I'm in the Detroit area, I'd prefer to meet up than ship but if I do ship we'll split the cost 50/50.
9
Michigan Commerce - Airsoft Guns Allowed / WTS/WTT AR57
« on: July 02, 2016, 05:24:18 PM »
http://imgur.com/WLsFXxh
Only issue is that the stock battery slot cover fell off and the rubber butt-plate is loose. Nothing that tape or cloth won't fix.
Comes with either the scope or a generic rds. (Really wouldn't recommend the scope cause it gets in the way of reloading)
1 highcap and 2 midcaps.
4x rail covers.
Gemtech replica suppressor.
Angled grip.
9.6v battery.
Looking for $180 or trade for any gun. Prefer to meet face to face in the Detroit area.
Only issue is that the stock battery slot cover fell off and the rubber butt-plate is loose. Nothing that tape or cloth won't fix.
Comes with either the scope or a generic rds. (Really wouldn't recommend the scope cause it gets in the way of reloading)
1 highcap and 2 midcaps.
4x rail covers.
Gemtech replica suppressor.
Angled grip.
9.6v battery.
Looking for $180 or trade for any gun. Prefer to meet face to face in the Detroit area.
10
Michigan Commerce - Airsoft Guns Allowed / Re: WTS Getting out of Airsoft clean house
« on: June 16, 2016, 07:41:37 PM »
Where are you in the Michigan area?
11
Michigan Commerce - Airsoft Guns Allowed / WTB/WTT LMG or any trades (Detroit Area)
« on: May 17, 2016, 10:38:52 PM »
Would love an LMG, don't know the risks of using one, don't care. Trades of anything are welcomed but I'm not a fan of gas primaries. Don't really care if I'm trading up or down, if I like it we're good. Prefer to do face to face since I don't want to trouble of boxing up and shipping.
Album of guns to trade: http://imgur.com/a/xUOX6
Everything is for trade but I need to hold onto the AR57 until June 5th.
Magpul M4 1 hicap, 2 midcaps: Funky ass franken gun who's top handguard cap is hotglued on. Stays and works, good enough for me. The only issue is that it's fuse broke and the outer barrel is stuck along with a botched tip. Internals were from some $150 stubby M4.
CM031 2 flash mags, 1 normal highcap: Rail is a little slanted to the right, no other issues.
AR57 1 hicap, 2 midcaps: The rubber piece at the end can come off easily but it doesn't expose the battery whatsoever. No other issues. Probably don't want the scope cause it doesn't fit properly and it's super wobbly, I have the stock ironsights.
G&G Raider Shell: no internals or other bits, metal handguard and a short full stock.
Not in picture: Glock 17 and Dan Wesson Revolver. Glock works fine with one mag and a shiny sanded slide, have propane adapter too. Silver Wesson comes with 18 shells, 1 speedloader, and shoots very hot, too hot.
Album of guns to trade: http://imgur.com/a/xUOX6
Everything is for trade but I need to hold onto the AR57 until June 5th.
Magpul M4 1 hicap, 2 midcaps: Funky ass franken gun who's top handguard cap is hotglued on. Stays and works, good enough for me. The only issue is that it's fuse broke and the outer barrel is stuck along with a botched tip. Internals were from some $150 stubby M4.
CM031 2 flash mags, 1 normal highcap: Rail is a little slanted to the right, no other issues.
AR57 1 hicap, 2 midcaps: The rubber piece at the end can come off easily but it doesn't expose the battery whatsoever. No other issues. Probably don't want the scope cause it doesn't fit properly and it's super wobbly, I have the stock ironsights.
G&G Raider Shell: no internals or other bits, metal handguard and a short full stock.
Not in picture: Glock 17 and Dan Wesson Revolver. Glock works fine with one mag and a shiny sanded slide, have propane adapter too. Silver Wesson comes with 18 shells, 1 speedloader, and shoots very hot, too hot.
12
Michigan Commerce - Airsoft Guns Allowed / WTS M4 Parts and Boneyard
« on: April 16, 2016, 04:53:14 PM »
Originally a stubby M4. I've downed way too much money trying to make it not a stubby. You get everything in the pic and whatever else M4 related I might dig up. Willing to part larger items. $120 shipped.
http://imgur.com/a/eb9hR
Issues:
- The longest barrel is misaligned (magpul one) (It was from airsoftspareparts.com )
- Fuse is burnt out.
- Internals are fine.
- The metal upper is stuck on a barrel I bought from someone, extremely tight and I don't have the tools to separate them. The tip of the threaded part is messed up but if sawed off it could work again. The inner barrel doesn't fit either so it might have been for a gas gun.
- Buffer tube is DIY put on, you'll need to hotglue or solder it back on if you take it off.
- The metal receiver parts and plastic receiver parts do not fit each other, they must go with their original ones.
The fuse and the stuck metal receiver are the biggest hurdles to getting this working again.
http://imgur.com/a/eb9hR
Issues:
- The longest barrel is misaligned (magpul one) (It was from airsoftspareparts.com )
- Fuse is burnt out.
- Internals are fine.
- The metal upper is stuck on a barrel I bought from someone, extremely tight and I don't have the tools to separate them. The tip of the threaded part is messed up but if sawed off it could work again. The inner barrel doesn't fit either so it might have been for a gas gun.
- Buffer tube is DIY put on, you'll need to hotglue or solder it back on if you take it off.
- The metal receiver parts and plastic receiver parts do not fit each other, they must go with their original ones.
The fuse and the stuck metal receiver are the biggest hurdles to getting this working again.
13
Michigan Commerce - Airsoft Guns Allowed / WTS KWA MP7 GBB
« on: October 21, 2015, 05:57:58 PM »
Images: http://imgur.com/a/OUP3B
Almost new condition, only issue is the metal on the sliding piece of the stock is a little worn. Comes with 1 non-leaky mag.
$180
Located in Northville.
Almost new condition, only issue is the metal on the sliding piece of the stock is a little worn. Comes with 1 non-leaky mag.
$180
Located in Northville.
Pages: [1]