Alright guys I have 3 cameras I'm selling together.  These cameras are what I used to start my youtube channel.
Whats included:

-2 Polaroid cube plus's
        One black and one red
                Black one is missing back (see picture)
-2 waterproof cases
-2 custom built cases
      one case has broken latch (fixed with metal latch)
      both have holes drilled in the back to allow you to charge and use at the same time while in case
      both have venting holes to prevent the cameras from overheating on hot days
      both have brainexploder protective mounts attached to the front,allowing you to put lexan to protect camera
-Canon Vixia HF R700
     Comes with custom mount I made, simply attaches to a scope ring that you mount upside down to your scope
     Also comes with custom kydex, to protect camera
-lens protector and rail mount to protect camera lens (i mounted mine to the front of my scope)
-will also include 2 charging cables for the Polaroid cubes and 2 pieces of lexan for the cases (not pictured)

You will need 2 micro sd cards, 1 sd card, a mount for your selfie camera, and mount for your head camera to get started.  All of these cameras have served me well, the only reason I am selling them is because I have upgraded to a couple gopros and a runcam.  I am asking $140 for everything.  I am located in Lansing and willing to travel reasonable distante, I also play at Futureball fairly frequently.  If you want to see what kind of quality you would get with these cameras please check out some of my older sniping videos on my youtube channel Bat Bear.  Here is one of the videos I have using these three cameras.







 wh

Hello,

I have my brand new KJW KC-02 version 1 for sale with tons of accessories/upgrades.  Everything is brand new and the gun has only been shot a few times.  Bought this a few months ago and my wife needs a new camera so I am selling this to try to get some money.





In the picture is everything you will get, which includes:

KC-02 in its current build:
SRU Bullpup stock
R-hopped 430mm pdi 6.01 tightbore inner barrel
Rogue Worx barrel spacers
Rogue Worx bolt carrier
Rogue Worx charging handle
Rogue Worx lightweight piston
Rogue Worx pin
3d printed tophatrunner hop up chamber (allows use of vsr barrels and buckings)
mock suppressor
suppressor adapter

Tapp airsoft electric drum winding mag.
original green gas mag
all original parts that were removed to install rogue worx upgrades
original stock with rail covers
original hop up chamber, barrel, and bucking
high flow gasket and flow valve for 1 mag
and the original boxes it came in

All of this stuff is worth over $850
I am looking to get $550 obo

I live near lansing, and frequently play at futureball in whitmore lake if you wanted to test or meet there.
Things to note:

This is brand new, and if you do any research on the tophatrunner 3d printed chamber, you will learn that it needs some time to break in (you just have to clean the barrel after every round for awhile until there is no more residue from the chamber)

If you keep the gun in its current form, you must be careful not to leave it in a hot car, the stock and hop chamber are 3d printed and can deform.  If you switch to original stock and chamber you will not have to worry,  my plan was to have it in bullpup body in spring and fall then the original in summer.

You will need a velcro strap or patch to cover hole to the drum mag (sorry, I'm keeping the patch I use)

I also have an extra tank, regulator, and line that I would also be willing to sell if you need one.

This is Matrix Vsr-10 airsoft sniper rifle.

$300 obo

Body is a Matrix VSR-10

Laylax Zero Trigger
Laylax 90 degree piston
Laylax Teflon Cylinder
Laylax Bolt Handle
Laylax Cylinder Head
Action Army Hop up Chamber
Maple Leaf Autobot Bucking
Stock Tokyo Marui 430mm barrel

Comes with 2, 25 round mags
Comes with scope in picture (Illuminated Center Point 3-9)
Can also give Skee's Turret Upper and Lower

I ran this set up (except I had a tightbore installed) for about 2 years.  Gun works flawlessly, and could easily get kills at 300ft.  I took the tightbore I was using out for another build, but throw one in this setup to get a fully upgraded vsr.  I am selling because I upgraded to a wolverine bolt system in my sniper and this just sits on the wall.

You can check out me using this gun here:
 

Only difference is the stock, outer barrel, and inner barrel from this video.
 
Possible open to trades, in particular I am looking for a KC02.

I play at Futureball in Whitmore Lake, MI every other weekend, message me to meet there and test fire if you would like.