Welcome, Guest. Please login or register.
Did you miss your activation email?

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ctres

Pages: [1] 2 3 4
1
Michigan Commerce - Airsoft Guns Allowed / GONE. Thunder B's, BBs, etc
« on: January 06, 2020, 07:50:53 PM »
I don't play anymore and have some random stuff still sitting around to get rid of. Rules are simple, everything is free, and it goes to the first person who is able to pick it up from me. Only other rule is that you have to take it all. If you don't want everything, pass it on to someone else. I'm trying to clean out clutter and I want this stuff gone. PM me for quickest response.

Here's the list of everything.

2x thunder B cores, unmodified w/ spoons
2x spare spoons
12x spare pins
15x thunder B shells (tripwire? style)
35X crosman C02 cartridges
2x brand new 4000rd bags of G&G .25s
1x opened bag of G&G .25s, probably 2000ish left
1x opened bag of G&G .2s, probably 200ish left
1x opened bag of Bioshot .32s, probably around 500 left
2X DCU camo tops, one raid modded w/ Velcro
1X ESS Profile NVG tan goggles

2
Don't play anymore and I'm clearing stuff out. These are going in the trash if no one claims them.

2x brand new 4000rd bags of G&G .25s
1x opened bag of G&G .25s, probably 2000ish left
1x opened bag of G&G .2s, probably 200ish left
1x opened bag of Bioshot .32s, probably around 500 left

Pickup in Farmington area only.

3
Michigan Commerce - Airsoft Guns Allowed / Thunder B Package $25
« on: May 20, 2019, 07:05:07 PM »
Looking to get rid of the last of my stuff. Package includes

2x thunder B cores, unmodified w/ spoons
2x spare spoons
12x spare pins
15x thunder B shells (tripwire? style)
35X crosman C02 cartridges

Everything for $25 picked up.

4
Michigan Commerce - Airsoft Guns Allowed / Thunder Bs
« on: December 26, 2018, 02:50:32 PM »
Up for sale is a Thunder B package including 2 cores, some spare pins and spoons, and probably 20 or so tripwire style shells, which I find to go off in a reasonable amount of time. I also have a pack of crosman CO2 cartridges I can throw in as well.

Local pick up only in Farmington area - $40 OBO.

5
Ctres still no answer from you on this?

Sorry, I don't always notice when someone posts in the thread. T6 PM'd me almost immediately after I posted this and purchased the box of parts, sorry about that.

6
Bump. Offer up on this stuff, trying to clear it out.

7
I sold all my airsoft guns a while back but I still have a couple boxes of stuff sitting around that needs to go. Everything is OBO, so offer up if you don't like the price. Pics will be up shortly.

1. Thunder AC6 Lipo charger w/ various accessories and a few extra lipo batteries - $30
2. 2X new bags of G&G .25g BBs, partially used bags of G&G .25s and .20s, and partial bag of bioshot .32s  - $15
3. Thunder B grenades -  2 cores, plus about 2 dozen flashbang style shells and some spare pins and spoons. Tested out but never used in game. $40.
4. Box 'o parts - various AEG internals and gearbox parts. $20 SOLD
5. 2X DCU shirts size Md. One raid modded w/ velcro by yours truly. $15 each
6. 2X Baofeng UV5R radios w/ speaker mics. $20 each. SOLD
7. TMC Airframe helmet w/ real ops core harness, crye helmet cover and crye rails. $120.
8. Blackhawk Riggers Belt size small. $10
9. Xcoretech X3200 chrono - $50.
10. ESS ICE Shooting Glasses (2 pairs 1 clear, one tinted lens) $25 for both, includes soft case



More to come as I sort through it.

8
Bump. M4 sold. 416 and G17 still need to go.

9
Bump, please buy this stuff, I need it gone

10
Bump. Both still available.

11
bump

12
It's been over a year and a half since I last played and I've pretty much lost interest. Looking to liquidate my stuff, starting with the guns. Expect another post to follow with gear/parts/accessories soon. Anyway...

VFC 416
Early gen with the VFC trademarks and flatter finish. Prolly circa 2008 or 2009.
Lonex gearbox
Riot 10:1 gears
Lonex red piston w/ lonex piston head and cylinder head w/ sorbo
Frankentorque motor - 32tpa arm in an SHS neo can
BTC spectre mosfet
Prometheus barrel with lonex hop up, can't recall what bucking. Never got around to finishing the rhop for it. 
I built this for maximum trigger response and it is practically instant with precocking enabled. ROF is around 24 on full auto but I never used it for that. Shoots awesome and deserves an r hop but I just never got around to it. Currently has an m100 spring and is shooting right around 350fps. Great all around, I'd prefer a local sale so the buyer can check it out first. Been very reliable and is in good shape externally w/
VFC sopmod stock
surefire style flash hider
FMA scout mount
Green laser peq15 (semi functioning IIRC)
Looking for $450

**sling/mount, T1/mount, and surefire not included. Everything else pictured comes with it.

Thunder B package deal - $40
Includes the following:
2x thunder B cores w/ spoon levers
Pack of spare pull ring pins
Spare spoons
About 20 tripwire shells (I actually prefer them bc they go off faster)
Most of a 40 pack of crosman C02 cartridges
These were only used a few times to test them and they work great.

G&G combat machine
DD mk18 RIS II - don't remember the brand, alien airsoft maybe? Nice dark realistic finish to it.
KAC style flashider
KAC style front flip up, cutoff rear
Car15 stock with masen recoil pad
Lonex blue piston iirc
SHS 12:1 or 13:1 can't remember for sure.
Frankentorque motor
CQD sling mount w/ logo & homemade VTAC style sling included
Prometheus barrel cut off and not perfectly clean, doesn't seem to effect accuracy
Sanded off annoying logos
Another great shooter that I put together as a backup on the cheap. Not quite as responsive as the 416 but still nice and has done well for me.  This one is sub 350 fps for cqb.
Looking for $190 for it. SOLD

Pics will be up soon, PM me with any questions.








Tokyo Marui G17
-Based on a TM
-Guarder OD Green Frame
-Guarder metal slide and barrel kit w/ real trademarks
-3X TM mags
-Not working correctly, I think it needs a new blowback unit.
Looking to get $110.

Random stuff - offer up if any of it is of interest to you
-Bunch of unopened backs of G&G .25 white BBs
-2x brand new Turnigy 11.1 1000mah buffer tube batteries
-Thunder AC6 Lipo charger with deans, tamiya, XT60 and various other connectors
-Peltor Comtac IIIs (single and dual comm versions available)
-Various real mbitr ptts - peltor, TEA, etc.
-TMC airframe helmet with real Crye rails & helmet cover + real ops core h nape and team wendy pad set
-2X medium dummy SAPI plates
-RAID modded (w/ velcro) DCU shirt (size md)
-Unmodded DCU shirt
-Magpul PTS 120rd M4 midcaps - PMAG and EMAG assortment - these are the really nice ones, not the cheap knockoffs
-MAG 190rd metal M4 midcaps
-Source Hydro Pouch
-Camelbak mini hydro pouch
-Tons of random internal parts/tools - motors, gears, springs, pistons, etc.
-Xcoretech chronograph



13
Airsoft Discussion / Re: Airsoft ROF - Which do you prefer and why?
« on: September 29, 2016, 01:56:50 PM »
Wow who even makes a 10 TPA motor? Or is it custom wound? When I stopped paying attention everyone was still using 20+ TPA armatures.

14
Airsoft Discussion / Re: Airsoft ROF - Which do you prefer and why?
« on: September 29, 2016, 08:23:24 AM »
I use precocking on my btc spectre in my 416 when I can remember to activate it. With riot 10:1s, frankentorque, a precocking the only limit to how fast it can fire semi auto is how fast you can pull the trigger.

I haven't kept up with airsoft mechanics much over the last year or so, so I wasn't aware of any trend towards high speed motors with high ratio gears. Have you experimented with it yet?

As for batteries, I have a couple 7.4s but never use them. While I'm sure any gun can be set up to be effective with them upping the voltage is an easy shortcut to faster trigger response and with a mosfet there really is nothing to worry about.

15
Accessories & Ammo / Re: XCORTECH X3200 MK3 Review
« on: September 28, 2016, 03:46:19 PM »
Well I think a number of people have found that the xcoretech gives less accurate (usually lower) readings when it is used in dim ambient lighting. I've observed with mine that when used in my basement at night with sub optimal lighting that readings can be deceptively low compared to what the same gun and chrono read in bright daylight.

Pages: [1] 2 3 4