Michigan Airsoft
Commerce => Michigan Commerce - Airsoft Guns Allowed => Topic started by: Phantom G3 on August 02, 2018, 11:17:05 AM
-
Just as the title suggests, I’m looking for some M249 parts made by Retro Arms!
I’m mainly looking for the following:
- CNC Gearbox Shell w/butt plug
- CNC Proprietary Hop Up Chamber
They look like the following, respectively:
(https://thumb.ibb.co/dAftgK/861_FDC17_77_C5_4_A43_BA13_DDEFEAC4_A506.png) (https://ibb.co/dAftgK)
(https://thumb.ibb.co/kWBc8z/2287_A645_31_F1_4457_846_B_5_D40552994_D3.png) (https://ibb.co/kWBc8z)
Yes, I already know that the stock shell is a beast; however, I cannot use their awesome hop up chamber unless I have their shell. Also, my stock shell doesn’t like SHS gears—the gears fit too tightly in the shell and I can’t sand the bearings down anymore.
-
I have a bullgear m249 hop up chamber, brand new, unused. Given you were able to get some bushings to work with the gears in the stock shell.
-
I have a bullgear m249 hop up chamber, brand new, unused. Given you were able to get some bushings to work with the gears in the stock shell.
I may take you up on that if I can’t find anyone with these two items. It’s unlikely that I will. I currently do not have any 8mm bushings. The only ones I have are glued into the Retro Arms V2 shell that I bought off you. I feel like switching to some SHS 8mm bushings could help my situation. If not, I’ll just go back to my stock set of gears for now.
-
I've got an assortment of 8mm bushing sets iirc. Anywhere from VFC steel, SHS, and possibly more if you go that route.