Welcome, Guest. Please login or register.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Gunny87

Pages: [1] 2 3
1
CA M249 box mag has SOLD.

3
V2 Protech MK 2.5 is SOLD.

4
I'm selling the following items. I'm located in Royal Oak, Mi.

I'm selling my G&G MP5A4 Proline with a Protech MKII. The solenoid, wire harness, and trigger board were newly purchased (straight from Protech) because I swapped the original parts when I upgraded to the MK 2.5. It also has an Amped IGL.

The nozzle was trimmed to proper length by Bingo Airsoft Deisgns. The gun is currently front wired and can be wired to the rear if desired.

The gearbox has a hair line crack in the front but since it's HPA swapped, it's not an issue unless you want to convert it back to an AEG.

The gun will come with one high cap magazine and the original box. I'm also including a bag with the AEG internals and the motor plate.

Externally the gun will come as pictured and comes with a low profile scope mount, Angel Custom ambi mag release, and two rails attached to the front hand guard.

Nozzle alignment is great, and I can send videos of it firing for proof if requested.

An FCU is NOT included with this gun. Either a Protech, Wolverine or Polarstar FCU for a single solenoid unit will work with it.

I also have a video of it shooting for proof that it’s fully functional.

I'm asking $300 + shipping for the gun as referenced and pictured. My price reflects it not coming with an FCU.

http://i470.photobucket.com/albums/rr64/kwincone/IMG_2121%201_zpsexio0jj7.jpg

http://i470.photobucket.com/albums/rr64/kwincone/IMG_2120_zpsgge3izap.jpg

http://i470.photobucket.com/albums/rr64/kwincone/IMG_2109_zpsztwmqsm0.jpg

5
I'm selling my "new In Box" condition Tokyo Marui MK23 NBB pistol. I've only put a few magazines through it in my basement, but have never fielded or used it in an actual airsoft game. There's not a single scratch or blemish on it.

Trades are completely intact. Everything that originally came with the gun is all here. LAM unit is fully functional although not very bright.


SOLD

















6
Michigan Commerce - Airsoft Guns Allowed / SOLD: Classic Army M24 SOLD
« on: September 30, 2017, 08:04:55 PM »
SOLD

I'M NOT PARTING OUT SO DO NOT ASK.

I'm looking to sell my heavily upgraded Classic Army M24 that I have owned for the last two years. I've maybe put around 100 rounds if that since owning.

Parts and upgrades below:

Internals:

Prommy 509mm inner barrel
Modify Baton Ryusoku Hard (nubless) bucking
Flat hopped
PDI CNC'd dual arm hop up
PDI 250% spring
Laylax PSS2 Bolt Handle
Laylax PSS2 Teflon Cylinder
Laylax PSS2 Cylinder Head
Laylax PSS2 Piston
Laylax PSS2 Piston Head
Laylax PSS2 Spring Guide
Aftermarket Trigger (brand unknown)


Externals:

Real Karsten Cheek rest
Avalon Marz Rail
50mm scope w/ Rings
Sling Attachments
Real Harris bipod

I rebuilt the hop up with a PDI rebuild kit from X-fire.org when I acquired this two years ago. I removed both grub screws and small nubs for each of the dual arms and put two o-rings down on the arms with one centered nub which effectively puts maximum force down on the arms for the flat hop modification. It can be reverted back so each arm can be adjusted separately however. It just doesn't work as great with the flat hop.

Chrono's at 525fps with .20s.

I also bought four Classic Army M24 magazines which will be included with the sale and an unopened bag of 2,000 WE .40 Sniper grade white bb's,

SOLD












7
Sure thing. I read that 5-6 groups were taken down and the admins were updating the group names to remove "guns" from their Facebook group names as well as even going as far as banning the sale of "real steal" parts and avoiding the mention of real gun manufacturer names. Not sure how much it'll help at this point. We'll see what happens.

8
Figured I would reply to this and report that some FB airsoft related groups have already been shut down. Looks like it's happening sooner than we thought. Looks like most FB airsoft related groups admins are taking action and are updating their group names and descriptions to minimize their chances of getting shut down.

9
Airsoft Discussion / Re: Polarstar Shot delayer for DMR
« on: February 22, 2016, 01:29:20 PM »
I agree with @Pagan that the 550fps is outdated, however it was intended to keep players safe with the technology available at the time. Which were AEGs, gas pistols, and bolt action sniper rifle platforms which was either spring or gas powered.

The game has changed with the re-introduction of HPA, but also with advances in the quality of components so now AEGs can handle a higher velocity than they could 15-20 years ago. I try to hold the same standards for both AEGs and HPA and not single out HPA since it's not right. 

My personal opinion is that anything that has the "ability" to fire full auto whether it's FCU locked to semi, has the selector plate modified should not have the same FPS limit as a bolt action sniper rifle.

You can modify that gun to fire full auto again, but you can't modify a bolt action sniper rifle to fire full outo unless you're that one guy who put an HPA engine into a bolt action platform (VSR body) which I imagine he's one of the only people on this earth to have done so.

The same goes with an AEG or HPA converted airsoft gun.

Only allow those that have put the money and time in tuning their bolt action sniper rifles to utilize our highest limits. That still doesn't guarantee that they are responsible players, but it limits the user base since you hardly see people using them these days.

I'd favor limiting all other platforms to 500 fps regardless of the technology being used. Regardless if it's modded to semi auto and has a shot delay.

10
Seller/Buyer Ratings / Re: T6e9a
« on: January 05, 2016, 06:36:42 PM »
T6e9a, wired a pressure switch to a box mag for me. The work was done very well and done in the same day! I was very impressed! I would definitely have T6e9a do work for me in the future!

11
I'm still around @Melson ! Yes, I remember that TM SR-16 very well. It was stock and in mint condition when you bought it off of me and it looks the same over all of these years! You bought it off of me and I don't ever remember seeing you at a game with it, so I'm willing to bet that you hardly used it after acquiring it.

You may also want to try throwing it up on some of the Michigan airsoft Facebook groups! They tend to get a little more traffic these days. You'll probably sell some of your stuff a little quicker too!

12
There are now more airsoft venues on the east side of the state than the west side actually.

In South East Michigan alone you have....

Action Paintball (Taylor) (outdoor)
Matrix Airsoft (Romulus) (outdoor)
Hell's Survivors (Pinkney) (outdoor)
Futureball Paintball (Whitmore Lake) (outdoor)
Eastside Airsoft (Warren) (indoor)
Phoenix Tactical (Clinton Township) (indoor/outdoor)

Per usual, check out the airsoft events section of this forum. Events also get posted on the "Michigan Airsoft", and "South East Michigan Airsoft" Facebook forums

You can buy a completed HPA airsoft gun from most retailers and there are other options for HPA other than Polar Star. Not that there's anything wrong with Polar Star at all. Look up Wolverine Airsoft's line of HPA products and then there's also Valken Airsoft.

Amped airsoft also sells completed HPA guns. However dropping in a Fusion Engine, or a SMP/Hydra/Inferno is pretty simple as well.

13
Airsoft Events / Re: Operation: Geronimo II - 12SEP2015
« on: September 06, 2015, 08:55:54 PM »
Well i dont send money over the internet unless its to a legit bissnuess
No offence i just dont know you so.... just bring cammies for each team?

This guy.....

14
Airsoft Discussion / Re: Well I guess this is good bye
« on: August 20, 2015, 04:36:32 PM »
@luke213 made a good point. I've been playing airsoft consistently for the last seven years, and I took a four year break when I was going into college since I didn't have time or money to stay in the hobby. Seeing that you're around the same age that I was when I got of this hobby, you never really know if you'll get back into it again in the future. I certainly didn't.

But sell whatever you want. If you have a few things that are rare and super hard to find, I'd suggest maybe sitting on them for a little bit until you really decide "yeah I won't be heart broken after parting with them."

Either way, farewell!

15
Airsoft Discussion / Re: Trends in airsoft
« on: August 12, 2015, 11:21:43 AM »
I have noticed it too actually. I've noticed an increase of Russian based camo and loadouts at both local and national level events. And I totally welcome it. Flora, Gorka, Partizan, you name it!

Pages: [1] 2 3