•  
Welcome, Guest. Please login or register.
« previous next »
Pages: [1]

Author Topic: VFC MK17 Magwell Problem  (Read 7828 times)

Monk

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 459
    • View Profile
VFC MK17 Magwell Problem
« on: November 04, 2015, 10:52:42 PM »
I'm away at college so I can't tinker with my guns as much as I would like. So, I was wondering if anyone has had problems with their VFC midcaps fitting pretty tight inside their VFC MK17 and what they did to fix it? Any help would be appreciated.

-Monk
Logged

Legionnaire

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 1228
    • View Profile
Re: VFC MK17 Magwell Problem
« Reply #1 on: November 05, 2015, 11:04:21 AM »
How long have you had it? I remember mine just loosening up with time because of the polymer lower.
Logged

Monk

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 459
    • View Profile
Re: VFC MK17 Magwell Problem
« Reply #2 on: November 12, 2015, 09:32:59 AM »
The gun is pretty new but it just seems too tight for a magwell that needs to "breakin". Then again you may be right, only time will telll that.
Logged

Legionnaire

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 1228
    • View Profile
Re: VFC MK17 Magwell Problem
« Reply #3 on: November 12, 2015, 11:48:24 AM »
I've had 5 Scar-H's over the years and the mag wells have all varied in retention. It is mostly due to variations in gun batches. If you really want to open it up a little bit, you could always try inserting a mag and then lightly heating up the mag well with a heat gun. It should loosen up the moulding.
Logged
Pages: [1]
« previous next »