Rules:

• Lowballs will be ignored
• If sending a trade offer, it must be comparable in value

I’m not really sure if I’m actually interested in selling this only because I love it so much...but almost anything can be bought for the right price. With that being said, I’m looking to see if there may be interest in this gun. I’m in absolutely no hurry to sell this because it is my current primary and I love using it.

It currently has a woodland “jungle” like camo paintjob to it. However, I’m going to be stripping this off and painting it to look like it was fresh out of the box from the factory.

Here is a list of the upgrade parts:

RA-Tech steel bolt/bolt stop $80
RA-Tech steel trigger assembly (full unit) $110
RA-Tech/Maple Leaf Autobot 70 degree bucking $10
RA-Tech NPAS $20
RA-Tech longated Allen wrench for Hop Up adjustment $7
RA-Tech steel buffer
RA-Tech steel buffer spring (3.3kg summer type, hard kick) $40

Angel Custom 510mm length, 6.01mm TBB $48
Angel Custom rear nozzle (stock front) $17

Comes with 7 non-leaky mags (unpainted) $228

Total in upgrades/additionals: $560
Cost of gun: $330 + $560= $890

I’m looking to get $600 OBO for it.

I’m looking for a new project so I’m thinking about selling this badass SAW. There is absolutely nothing wrong with it. The base gun is an A&K.

I’m a tech and I have worked on 249’s for many years. I know every little issue an A&K can have and I have fixed every single one. There are no feeding issues and it has a very functioning Hop Up.

Now what you’re wanting to really know, the parts list:

Electrical
- Gate NanoSSR MOSFET (w/signal wires)
- 16awg Gate Wiring
- Gate gold-plated motor terminals
- Dean’s Connector
- Upgraded 20A Trigger Switch
- Echo 1 HT motor

Power
- M125 spring

Compression
- AIM Hellfire Piston
- Lonex Aluminum Piston Head
- Polished Cylinder
- Retro Arms 7075 Aluminum Cylinder Head
- Retro Arms 7075 Aluminum Nozzle (w/o-ring)
- Falcon Bucking

Barrel
- PDI 6.03mm TBB
(It will come as shown in the para format)

Gears
- A&K Bevel
- G&G’s ‘Top Tech’ Spur and Sector

This gun shoots very far and is very accurate. Gun will NOT come with accessories shown. It WILL, however, come with the lower rail section. It will come with a MAG box mag that works, but you need to hold down the press-sensor while shooting. I think it just needs to be cleaned out.

Looking for $400 PICK UP, $450 SHIPPED

Is anyone as excited as I am for this release?! Looks like it’s hitting shelves sometime this year.

Like the title states, I’m looking to purchase a WE Tech 1911A1. Please no MEU or 2011’s...just the A1. Thanks!


Message me with what you have! I have plenty of mags, so if you don’t want to sell it with any, that’s not a problem.

Looking to sell or trade my RICAS. This vest has been used and is slightly faded, but barely at all. You can see the real ATACS FG coloring on the brand new hydro carrier and compare it to the vest for fading. This fits a S-L size perfectly but can also fit an XL too (going by shirt sizes). This vest fits 10x12 plates perfectly in the front and back. There are also side pouches that be rolled up when not in use. They hold 6x6 side plates. It comes with everything seen in the stock photo above (please message me for additional pictures). It will also come with a Condor hydro carrier in ATACS FG (BRAND NEW!) as well. The vest does NOT have the pull cord.

$250
SALE! $180

About Warrior Assault Systems:
WAS is a real steel manufacturer contracted by the British Royal Government to make vests for their Army and SF. These vests go for $400 brand new.

What is RICAS?
RICAS, or Releasable Integrated Combat Armor System, is basically a compact CIRAS. They wanted the pull cord the CIRAS had and the way it fit on the body, but made it compact because of how many military units and law enforcement agencies want the added mobility.



Trade List?

- MAR CIRAS
- LBT 6094
- Shellback Banshee
- Or something equivalent

I prefer Ranger Green, but I don’t mind listening to what people have.


Bad lighting, but it was at night with the lights turned on:

My teammate has an M4 S-System that has been highly upgraded and is looking to trade for a SAW/MK46. He received the gun from someone on MIA a little while back but used my SAW in a game and really likes the support type of role in a squad.

Currently, we are about to upgrade the wiring to lipo ready wires and the part was just ordered from Evike.

*MONEY WILL BE ADDED TO THE DEAL DEPENDING ON WHAT IS OFFERED*

Here is what has been upgraded:

External Upgrades:
-Tromix Shark Flash Hider (pretty badass looking)

Modifications:
-Cut the plastic body so it could fit a one piece hop-up (metal hop)
-Dremeled the battery compartment to fit bigger batteries

Upgrades:
-6.03mm 363mm Madbull Black Python tight bore barrel
-G&P one piece hop up and bucking
-Madbull Fishbone spacer hop up nub
-Matrix CNC o-ring air seal nozzle
-G&G M120 spring
-AIM Reinforced Tappet Plate
-G&G Polycarb-piston
-CNC Double o-ring Cylinder head
-CNC Double O-ring Piston Head
-ICS Anti-reversal Latch
-RH Vortex Bearing spring guide
-Torque-up High torque motor
-Systema Shims

The gun is currently in Red Alpha Customs' paint shop being painted a tan/OD camo pattern and given artificial wear so pics will be on request only until it is finished. Pics will be posted on MIA after process is finished